General Features
Pilomat 275RM
The 275 RM removable PILOMAT BOLLARDS have been designed and built with architectural appearance
similar to that of the retractable PILOMAT BOLLARDS and therefore also allow for the combined
use of both versions. The 275 RM PILOMAT BOLLARDSremovable bollards are available in the
standard version or with a safety lock to prevent the easy removal of the bollard by
unauthorised persons.
The removal of the bollard is carried out using a mechanical key that unlocks the restraint
system, allowing for the lifting and removal from the base of the bollard previously cemented
into the ground. The base is made up of an integrated enclosure and, once removed, the bollard
should only be moved and eventually placed in another stand at the side of the point that is
protected.
Pilomat 120RM
The 120 RM removable PILOMAT BOLLARDS have a square base, in the interior there is reinforced
steel meant to ensure high resistance to breakage. The 120 RM removable PILOMAT BOLLARDS are
complete with safety lock, round handle and the roller is placed at the base for easy
relocation.
The removal of the bollard is carried out using a mechanical key that unlocks the restraint
system, allowing for the lifting and removal from the base of the bollard previously cemented
into the ground (in addition a plate enclosure base is provided). Once removed, the bollard can
be moved and placed on its pedestal at the side of the point protected.
Pilomat 275/K4RM
The removable bollard PILOMAT 275/K4 RM are typically used to prevent the parking , transit and
access of unauthorised vehicles in sensible sites. It is advised that the removable bollard is
used only if the amount of daily movements is limited (if not, the automatic version should be
used) or when the depth of installation does not allow for the installation of the automatic
bollards.
Copyright
TCS CONTROLS SDN BHD - All Rights Reserved